Description: Thermal Overload Relay Unit Type LK1 is a three pole Bimetallic unit housed in a Bakelite enclosure. It is individually calibrated & tested on automatic machines to ensure foolproof protection to the motor from overload & resulting burnouts. The relay is ambient temperature compensated for operation between 5degC to 55degC. Available in a wide range of current ranges with easily adjustable current setting knob in the front for easy access, the relay comes with a Manual reset button that also acts as the STOP button.
- Mounting: Contactor Mounting : Type LK1
- Current Ranges: 1-1.6A, 1.5-2.5A, 2.5-4A, 4-6.5A, 6-10A, 9-14A, 10-16A, 11-18A, 13-21A
- Trip Class: 10A
- Temperature Compensation: Compensated, without phase loss sensitive
- Terminals capacity : 4sqmm
Description: Thermal Overload Relay Unit Type HK is a three pole Bimetallic unit housed in a Bakelite enclosure. It is individually calibrated & tested on automatic machines to ensure foolproof protection to the motor from overload & resulting burnouts. The relay is ambient temperature compensated for operation between -5degC to 40degC. The reset mechanism can be adjusted to hand or Auto mode; in manual mode, the red button needs to be pressed to reset the relay after an overload has occurred, after allowing sufficient cooling time. In Auto mode, the relay will reset on its own after cooling down. Available in a wide range of current ranges with easily adjustable current setting knob, that is covered by a shroud to avoid unintentional change. The tripping mechanism can be tested a trip test mechanism without electrically connecting the relay.
- Mounting: Contactor Mounting : Type HK-0
- Current Ranges: 6-9.3A, 8.9-13.5A, 13.2-20A, 17.4-24A
- Trip Class: 10A
- Temperature Compensation: Compensated
- Terminals capacity : 4sqmm
Description: Thermal Overload Relay Unit Type M1-BR is a three pole Bimetallic unit housed in a Bakelite enclosure. It is individually calibrated & tested on automatic machines to ensure foolproof protection to the motor from overload, Single Phasing & resulting burnouts. The relay is ambient temperature compensated for operation between -5degC to 40degC. The reset mechanism can be adjusted to hand or Auto mode; in manual mode, the red button needs to be pressed to reset the relay after an overload has occurred, after allowing sufficient cooling time. In Auto mode, the relay will reset on its own after cooling down. Available in a wide range of current ranges with easily adjustable, front accesable current setting knob, The tripping mechanism can be tested a trip test mechanism without electrically connecting the relay.
- Mounting: Contactor Mounting : Type HK-0 / Type ML1 / various contactor Can also be mounted independently with a separate Kit
- Current Ranges: 0.6-1A, 1-1.6A, 1.5-2.5A, 2.5-4A, 4-6.5A, 6-10A, 9-15A, 13-20A, 18-24A
- Trip Class: 10A
- Temperature Compensation: Compensated, phase loss sensitive
- Terminals capacity :4sqmm
- Overall dimensions: W70X H40+20 D72 mm
Description: Thermal Overload Relay Unit Type M1-BR is a three pole Bimetallic unit housed in a Bakelite enclosure. It is individually calibrated & tested on automatic machines to ensure foolproof protection to the motor from overload, Single Phasing & resulting burnouts. The relay is ambient temperature compensated for operation between -5degC to 40degC. The reset mechanism can be adjusted to hand or Auto mode; in manual mode, the red button needs to be pressed to reset the relay after an overload has occurred, after allowing sufficient cooling time. In Auto mode, the relay will reset on its own after cooling down. Available in a wide range of current ranges with easily adjustable, front accesable current setting knob, The tripping mechanism can be tested a trip test mechanism without electrically connecting the relay.
- Mounting: Independent mounting
- Current Ranges: 18-27A, 24-36A, 34-51A
- Trip Class: 10A
- Temperature Compensation: Compensated, phase loss sensitive
- Terminals capacity : 16sqmm ( with lugs)
- Overall dimensions: W 90X H65 X D100 mm